Power Washing Advice for the Common Areas of Your Property

At some point, every homeowner struggles with stains on the roof, dirty siding, and a worn out deck. Fortunately, if you have a little time and the right equipment, it is a simple task to remove stains and restore a newer look.

There are a few important things to remember before you start cleaning. You can contact professionals for low pressure soft wash houses/buildings.

Not doing the job properly can result in permanent damage to your property and may require replacement of damaged pieces. So you want to make sure you know exactly what you are doing to avoid any mishaps.

1: Roof

Many homeowners across the American Southeast and parts of the Midwest have had to combat a roof bacteria known as gloeocapsa magma, a form of ancient cyanobacteria. Typically, roof sections which do not get early sun hold onto morning dew longer and create a perfect atmosphere for moisture-loving cyanobacteria.

2: Decks

Cleaning a deck with a power washer can be a daunting prospect. As anyone who has handled a pressure washing system knows, it is very easy to damage or destroy what you are trying to clean. A wooden deck can be chewed to pieces if you don't use the proper settings.

Typically, you will want to use a 45 degree nozzle at about 3,000 PSI. The most important thing to remember is to keep the nozzle far enough away from the deck that you are not removing pieces of the wood itself.

3: Siding

Using a pressure washer on siding is a fairly delicate process compared to a deck or roof. If your siding is painted, you want to use a lower pressure washer with a 45 degree nozzle and keep it no closer than 12 inches from the surface. Any closer and you risk removing the paint rather than just cleaning the surface. 

Leave a Reply

Your email address will not be published. Required fields are marked *